RodeNT1 Large Diaphragm Condenser, Ai-1 Audio Interfface Shockmount, Pop Screen And Xlr Cables

SPECIFICATIONS

NT1 Specifications

• - Output Connection: 3 Pin XLR. Balanced output between pin 2 (+), 3 (-) and pin 1 (ground)
• - Acoustic Principle: Pressure gradient
• - Active Electronics: JFET impedance converter with bipolar output buffer
• - Directional Pattern: Cardioid
• - Frequency Range: 20Hz ~ 20kHz
• - Output Impendence: 100Ω
• - Equivalent Noise: 4.5 dBA SPL (as per IEC651)
• - Maximum Output: +8 dBu (1kHz, 1% THD into 1K Ω load)
• - Sensitivity: -29 dB re 1V/Pa (35mV @ 94dB SPL) ± 2dB @ 1kHz
• - Dynamic Range: 128 dB SPL
• - Maximum SPL: 132 dB SPL
• - Signal-to-Noise Ratio: 90 dBA SPL (as per IEC651)
• - Power Requirements: 24V phantom power 48V phantom power
• - Net Weight (grams): 395
• - Colour: Black
• - Diameter (millimetres): 50
• - Length (millimetres): 187

AI-1 Specifications

• - Computer Connectivity: USB
• - Form Factor: Desktop
• - Simultaneous I/O: 1 x 2
• - Number of Preamps: 1
• - Bit Depth: 24-bit
• - Sample Rates: 44.1 kHz 48 kHz 88.2 kHz 96kHz
• - Analog Inputs: 1 x Neutrik XLR-1/4” combo
• - Analog Outputs: 2 x 1/4” (impedance balanced) 1 x 1/4” (headphones)
• - Direct Monitor: Yes
• - USB: 1 x USB Type C
• - Bus Powered: Yes
• - OS Requirements: Mac OS 10.10 or later Windows 7 or later
• - Power: USB bus-powered
• - Net Weight (grams): 560
• - Height x Width x Depth (millimetres): 38 x 124 x 100

Box Contains

• - 1 x NT
• - 1 x Al-1
• - 1 x SM6
• - 1 x XLR to XLR Cable
• - 1 x USB-C to USB-A Cable